Single Girder Floor Running Gantry Crane
5mtrs. to 50mtrs.
1ton to 10ton
Class-I to Class-IV (M1-M8)
Floor operated through pendent pushbutton station (Optional remote or cabin Operated)
Try the best thing about single girder floor running gantry crane
The introduction of a single girder floor running crane is the main thing in the industrial world. It has lowered the effort of many industrial works. The industrial work is something very tiring and tough. Thus with this tool, the tedious industrial work has been reduced to a great extent. We should be thankful to the latest technologies and science who have introduced these tools.
Top characteristics of single girder gantry crane
We are one of the chief Single Girder Floor Running Gantry Crane manufacturers in India who are associated with the task of producing various types of cranes for industrial purposes. We produce cranes that can help in lifting heavy products very easily and smoothly. These types of cranes are available with a single beam that has less dead weight. We produce cranes in a cost-effective manner. We always stress on producing cranes that requires for less money.
Several things are special for our products. Some of them are as follows.
Other Details Of The Single Girder Floor Running Gantry Crane
- Manufacturing Range
- Specifications
- Standard Features
- Optional Features
- Safety
- Packing & Forwarding
- Pre-Sales Service
- After-Sales Service
- Manufacturing Range
- 1t. Cap. Single Girder Gantry Crane
- 2t. Cap. Single Girder Gantry Crane
- 3t. Cap. Single Girder Gantry Crane
- 5t. Cap. Single Girder Gantry Crane
- 7.5t. Cap. Single Girder Gantry Crane
- 10t. Cap. Single Girder Gantry Crane
- Specifications
- Standard Features
- Simple and optimum Design ensuring minimum dead weight, Wheel Load Headroom and easy to maintenance
- Easy to installation
- Reliable structure
- Higher efficiency to save power
- All motions are protected with Fail safe type brakes (which are applied when power supply is off and release when power supply is on.)
- All motions are protected with limit switches
- Rubber buffers are provided to extra protection against collision in case of limit switch failure
- Dustproof panel box with reputed make switch gear or as per customer’s approval
- 110 V Control voltage selected for protection of Crane operator against any electrical shock
- With electrical Interlocking to prevent simultaneous operation of opposite motion
- Using "C' Rail / I Section type C.T. & Push button Festoon system it’s give long life and trouble free operation
- Unbreakable, Handy, light weight PVC Pushbutton
- Coupling less L.T. & C.T. Motion up to 7.5 Hp, (Less mechanism less maintenance)
- VFD in Long Travel Motion, Smooth Start & Stop (Maximize the life of Mechanism)
- Own Make Gearbox so which are easy to maintenance and we can provide any parts at any time from our stock
- Platform with hand railing for easy, simple & safe maintenance of the crane extended partially or totally along the girder width
- Optional Features
- Radio Remote Control / Cabin Control
- Dual speed for all motion
- VFD in all motion
- Siren While Traveling a crane
- Load Cell with Display to weigh a Load or protection against overload
- Special Dimension Hook
- Other Reputed Brand Gearbox
- Drag Chain in Festoon system
- Protective Paints / Coating
- Safety
- Over Lowering or over hoisting prevention limit switch
- Hook Safety Latch
- Overload Relays
- Travelling limit switch
- Rubber buffer
- Brakes in Hoisting as well as c.t & L.T.
- Main Switch
- On/ off switch in push button /Emergency stop
- MCB /fuse
- All 4 core cables with Earth cable
- Maintenance platform
- Siren in goliath crane
- Anti-collision device when more than one crane on same bay
- Packing & Forwarding
- Pre-Sales Service
- One to one service guarantees you the best purchasing experience.
- Strong production capacity and professional workmen guarantee you the short delivery.
- Strict delivery inspection guarantees you the high quality products.
- The short delivery time.
- After-Sales Service
- One year warranty for Cranes
- Providing free quick-wear part
- Low charge for continue maintenance when warranty is expired
- Exclusive engineer support at any time.
- Highly professional training to end-users
| Descriptions | Specifications |
| Capacity | 1t.,2t.,3t.,5t.,7.5t.,10t. |
| Area | Non-Hazardous/Hazardous as per customer requirement |
| Test Load | 125% of SWL |
| Height of Lift | 3 meters to 50 meters or as per customer requirements |
| IS Code | IS807, IS3177 |
| Type | Single Girder |
| Locations | Indoor/Out door |
| End Carriages | The End Carriages are welded construction type and fabricated from plates or Std. section type constructions. |
| Bridge Girders | The girders are of plate fabricated box type construction design to sustain all stresses arising due to vertical & lateral forces with impact to which they are subjected. The maximum deflection of the main girder is limited to 1/750 the span of live loads including the weight of the trolley or hoist. |
| Platform | M.S. Checkered plate/anti-skid plate’s full-length platform shall be provided on one side of the bridge girder in double girder crane |
| End Stopper | Steel end stoppers are provided on either side of the bring to limit the motion of the trolley. All the buffers will employ springs for shack absorption. |
| Steel | Steel confirming to IS-2062 or equivalent is used in the manufacturing of the main load bearing. (Mainly Essar or Sail make) |
| Wheel Base | As per span and IS code |
| L.T. Drive System | Twin drive type. |
| Main-Hoisting | 1 meter per minute to 20 meters per minute or as per customer’s requirements (micro speed will be provided on demand) |
| L.T. | 1 meter per minute to 120 meters per minute or as per customer’s requirements (micro speed will be provided on demand) |
| C.T. | 1 meter per minute to 120 meters per minute or as per customer’s requirements (micro speed will be provided on demand) |
| Ele. Motors | All motors are off S-4 duty, Squirrel cage ,40% CDF,150 S/hr., IP -55 with Class F insulation or as per required class and duty |
| Brakes | Electro-Hydraulic shoe type/ Electromagnetic Disc /AC & DC Electromagnetic Shoe type brake shall be provided in Hoisting L.T. & C.T. These brakes are automatically released when the motor circuit is on and is applied the motor circuit is off |
| Wire Rope & No. of aal | Selected as per crane capacity and IS Code he makes of wire rope will be used Usha-martin |
Top characteristics of single girder gantry crane
We are one of the chief Single Girder Floor Running Gantry Crane manufacturers in India who are associated with the task of producing various types of cranes for industrial purposes. We produce cranes that can help in lifting heavy products very easily and smoothly. These types of cranes are available with a single beam that has less dead weight. We produce cranes in a cost-effective manner. We always stress on producing cranes that requires for less money.
Several things are special for our products. Some of them are as follows.
- We produce tool in such a manner so that it can reduce the freight costs and have a faster installation process.
- We manufacture tools that are economical for medium and light-duty cranes.
- We stress to provide best-quality hooks for the cranes. This will help to lift the products peacefully.
Other features of Single Girder Floor Running Gantry Crane
We have turned out to be the leading Single Girder Floor Running Gantry Crane suppliers who have gained good fame and popularity within a short span of time. We have produced the cranes to be used mainly in warehouses and various workshops. This has reduced the burden of industrial work largely.
The floor running gantry crane can be easily utilized for various types of works. They can also be handled smoothly by the users. We always insist the buyers buy these types of cranes for lowering the burden of work.
Various Components Single Girder Floor Running Gantry Crane
