...

Goliath Crane

Span

5mtr. to 50mtr.

Capacity

1ton to 10ton

Duty Class

Class-I to Class-IV (M1-M8)

Operation

Floor operated through pendent pushbutton station (Optional remote or cabin Operated)

About Our Product

Most of the heavy industrial works

These cranes are available in single girder type or double girder type as well as EOT Cranes but these cranes are run on floor mounted rail by its two legs which is fabricated from steel section or plates, Our Robust gantry crane which save your expensive structure cost, easily expandable long travel whenever you need you may expand longitudinal travel with low cost compare to EOT,no need of heavy structure and foundations, easily disassembly and transfer ay anywhere, useful for temporary light or heavy work. 3t. to 100t. Cap., up to 55-meter span Double Girder type and required Height of lift (Higher Capacity and span also available on request).

Know More

Other Details of the Goliath Crane

  • Manufacturing Range
  • Specifications
  • Standard Features
  • Optional Features
  • Safety
  • Packing & Forwarding
  • Pre-Sales Service
  • After-Sales Service
  • Manufacturing Range
    • 1t. to 100t. Cap., up to 50-meter span and required Height of lift (for Higher Capacity and span please consult us)
    • 1t. Cap. RUBBER TYRE GANTRY Crane
    • 2t. Cap. RUBBER TYRE GANTRY Crane
    • 3t. Cap. RUBBER TYRE GANTRY Crane
    • 5t. Cap. RUBBER TYRE GANTRY Crane
    • 7.5t. Cap.RUBBER TYRE GANTRY Crane
    • 10t. Cap. RUBBER TYRE GANTRY Crane
    • 12.5t. Cap.RUBBER TYRE GANTRY Crane
    • 15t. Cap.RUBBER TYRE GANTRY Crane
    • 20t. Cap. RUBBER TYRE GANTRY Crane
    • 25t. Cap.RUBBER TYRE GANTRY Crane
    • 30t. Cap.RUBBER TYRE GANTRY Crane
    • 40t. Cap.RUBBER TYRE GANTRY Crane
    • 50t. Cap. RUBBER TYRE GANTRY Crane
    • 60t. Cap.RUBBER TYRE GANTRY Crane
    • 75t. Cap. RUBBER TYRE GANTRY Crane
    • 80t. Cap.RUBBER TYRE GANTRY Crane
    • 100t. Cap. RUBBER TYRE GANTRY Crane
  • Specifications
  • Descriptions Specifications
    Capacity 1t.,2t.,3t.,5t.,7.5t.,10t.,12.5t,15t.,20t.,25t.,30t.,40t.,50t.,60t.,75t.,80t.,100t.
    Area Non Hazardous/Hazardous as per customer requirement
    Test Load 125% of SWL
    Span 5 meters to 50 meters or as per customer requirements
    Height of Lift 3 meters to 50 meters or as per customer requirements
    Duty & Class Class-I, Class-II, Class-III, Class-IV,
    IS Code IS807, IS3177
    Type Double Girder
    Locations Indoor/Out door
    End Carriages The End Carriages are welded construction type and fabricated from plates or Std. section type constructions.
    Bridge Girders The girders are of plate fabricated box type construction design to sustain all stresses arising due to vertical & lateral forces with impact to which they are subjected. The maximum deflection of the main girder is limited to 1/750 the span of live loads including the weight of the trolley or hoist.
    Platform M.S. Checkered plate/anti skid plate’s full length platform shall be provided one side of the bridge girder in double girder crane
    End Stopper Steel end stoppers are provided on either side of the bring to limit the motion of the trolley. All the buffers will employ springs for shack absorption.
    Steel Steel confirming to IS-2062 or equivalent is used in the manufacturing of the main load bearing.  (Mainly Essar or Sail make)
    Wheel Base As per span and IS code
    L.T. Drive System Twin drive type.
    Main-Hoisting 1 meter per minute to 20 meter per minute or as per customer’s requirements (micro speed will be provided on demand)
    L.T. 1 meter per minute to 120 meter per minute or as per customer’s requirements (micro speed will be provided on demand)
    C.T. 1 meter per minute to 120 meter per minute or as per customer’s requirements (micro speed will be provided on demand)
    Ele. Motors All motors are off S-4 duty, Squirrel cage ,40% CDF,150 S/hr., IP -55 with Class F insulation or as per required class and duty
    Brakes Electro Hydraulic shoe type/ Electromagnetic Disc /AC & DC  Electromagnetic Shoe type brake shall be provided in Hoisting L.T. & C.T. These brakes are automatically released when the motor circuit is on and is applied the motor circuit is off
    Wire Rope & No. ofaal Selected as per crane capacity and IS Code he make of wire rope will be used Usha-martin
     
  • Standard Features
    1. Simple and optimum Design ensuring minimum dead weight, Wheel Load Headroom and easy to maintenance
    2. Easy to installation
    3. Reliable structure
    4. Higher efficiency to save power
    5. All motions are protected with Fail safe type brakes (which are applied when power supply is off and release when power supply is on.)
    6. All motions are protected with limit switches
    7. Rubber buffers are provided to extra protection against collision in case of limit switch failure
    8. Dustproof panel box with reputed make switch gear or as per customer’s approval
    9. 110 V Control voltage selected for protection of Crane operator against any electrical shock
    10. With electrical Interlocking to prevent simultaneous operation of opposite motion
    11. Using "C' Rail / I Section type C.T.  & Push button Festoon system it’s give long life and trouble free operation
    12. Unbreakable, Handy, light weight PVC Pushbutton
    13. Coupling less L.T. & C.T. Motion up to 7.5 Hp, (Less mechanism less maintenance)
    14. VFD in Long Travel Motion, Smooth Start & Stop (Maximize the life of Mechanism)
    15. Own Make Gearbox so which are easy to maintenance and we can provide any parts at any time from our stock
    16. Platform with hand railing for easy, simple & safe maintenance of the crane extended partially or totally along the girder width
  • Optional Features
    1. Radio Remote Control / Cabin Control
    2. Dual speed for all motion
    3. VFD in all motion
    4. Siren While Traveling a crane
    5. Load Cell with Display to weigh a Load or protection against overload
    6. Special Dimension Hook
    7. Other Reputed Brand Gearbox
    8. Drag Chain in Festoon system
    9. Protective Paints / Coating
  • Safety
    1. Over Lowering or over hoisting prevention limit switch
    2. Hook Safety Latch
    3. Overload Relays
    4. Travelling limit switch
    5. Rubber buffer
    6. Brakes in Hoisting as well as c.t & L.T.
    7. Main Switch
    8. On/ off switch in push button /Emergency stop
    9. MCB /fuse
    10. All 4 core cables with Earth cable
    11. Maintenance platform
    12. Siren in goliath crane
    13. Anti-collision device when more than one crane on same bay
  • Packing & Forwarding
  • Electric & Small parts are packed by high quality wooden crate to reduce distortion in conveying; Main beams, end carriages and electric hoist are packed by Wrapping of plastic roll It can reduce abrasion when transport.

  • Pre-Sales Service
    1. One to one service guarantees you the best purchasing experience.
    2. Strong production capacity and professional workmen guarantee you the short delivery.
    3. Strict delivery inspection guarantees you the high quality products.
    4. The short delivery time.
  • After-Sales Service
    1. One year warranty for Cranes
    2. Providing free quick-wear part
    3. Low charge for continue maintenance when warranty is expired
    4. Exclusive engineer support at any time.
    5. Highly professional training to end-users

Various Types Of Goliath Crane

Details About Goliath Crane

As the name connotes, a Goliath crane is a huge structured crane that is mainly used for various types of industrial works. It is used to handle the extreme type of heavy loads that are found in many industrial applications. It may either use a single girder or a double girder design. These types of cranes hold the ability to move in all three axes. The best thing about this crane is that it can be easily handled by the users.

These cranes are available in single girder type or double girder type as well as EOT Cranes but these cranes are run on the floor-mounted rail by its two legs which are fabricated from steel section or plates, these cranes are specially designed for outdoor working. We design and manufacture Double Girder EOT Crane as per Indian Standard IS; 807, & IS 3177.

Our Other Products

Frequently Asked Questions

How much does a goliath crane typically cost?
There’s no single price tag here, since cost shifts a lot based on capacity, span, girder type and whether you go with rail wheels or rubber tyres. A basic single girder version for lighter loads will obviously cost less than a heavy-duty double girder one built for 100-ton capacity. Getting a quote based on your actual requirement is the only accurate way to know.
They’re common in shipyards, steel plants, container yards, heavy engineering units, and construction sites where materials need to be moved across large open areas. Basically, anywhere loads are too heavy or bulky for a forklift, but there’s no building structure to mount an overhead crane on, a goliath crane fits in well.
It can, and rubber tyre versions are pretty common, covering a wide range from 1 ton to 100 tons. This works well at sites where laying a fixed rail track isn’t really practical — the crane can move around more freely without needing a permanent track set into the ground.
There’s a fair list here — hook safety latch, overload relays, travelling limit switches, rubber buffers, emergency stop, and brakes across hoisting, cross travel and long travel. A low 110V control voltage is also used specifically to protect the operator from electric shock, since crane operators handle the pushbutton station directly.
It does, and it’s worth checking before you buy. Cranes built with the manufacturer’s own gearbox are usually easier to service later, since spare parts stay available from their own stock instead of depending on a third-party brand that might be harder to source down the line.
Yes. A pendant pushbutton on the floor is the usual setup, but radio remote and cabin control are both options if you’d rather go that route. It’s worth thinking about if your site deals with very heavy loads or if operators need to stay clear of the load while it’s in motion.
They’re actually built with this kind of use in mind. Since they run on their own legs rather than needing an overhead building structure, they suit outdoor and semi-industrial sites well. The dustproof panel box also helps protect the electricals from dust and weather, which matters a lot for cranes working outside all day.
With proper maintenance and normal duty cycles, these cranes are built to run for many years without major issues. Life expectancy depends a lot on how heavy and frequent the lifting is, along with how consistently servicing and inspections are kept up over time.